This tester is designed to not-destructively measure the thickness of non-magnetic coatings(including
paint,enamel,plastic,epoxy,etc)on iron,steel or aluminum.
PLEASE NOTE: For coatings on steel, measurement accuracy is not guaranteed
0.0mm to 2.0mm
0mil to 80mil
Accuracy : 2%rdg ±0.1mm, or 2%rdg ±4mil
Note: Accuracy is guaranteed at the operating temperature of 23?±? and relative humidity of not more than 75%.
Resolution : 0.1mm/1mil
Power Supply : 1 x 3V button cell, CR2032 or equivalent( Move the battery's insulating piece away before using )
Operating Environment:Temperature: 0-40?
Relative Humidity: < 80%
Temperature Coefficent:0.05x(2%rdg±0.01mm,or 2%rdg±4mil)/? (< 18? or >28?)
Storage Environment:Temperature:-10? to 50? Relative Humidity:< 80%
Size:6.9 x 3.8 x 2cm
Weight : About 23g (including button cell)
1 x Paint Thickness Tester
1 x English Manual
Standard Blister Packaging
Please note: Accuracy is 2%rdg±0.1mm, or 2%rdg±4mil (generally measurement)
Power supply by 1 piece 3V button cell, CR2032 or equivalent.( Move the battery's insulating piece away before using )
Automatic calibration, Data hold. Mini size with LCD display.Two units available:mm/mil.
Mainly used to non-destructively measure the paint thickness of car.
Measuring range is 0.0 to 2.0mm or 0 to 80 mil.