The Amprobe AMB-50 industrial high-voltage insulation resistance tester is a digital meter that measures insulation resistance and voltage to help reduce shock hazards and downtime on electrical systems that include wires, cables, transformers, surge arresters, generators, and electrical motors. The tester has automatic range selection for increased safety. The unit measures 0 to 600V alternating current (AC) or direct current (DC) and insulation resistance from 0 to 1 teraohms using 500, 1,000, 2,500, or 5,000V DC test voltage. A low-resistance range (0 to 4,000 ohms) is used to measure resistance in motor windings. The internal memory holds up to 18 test results for later download to a PC using the included USB cord. The tester is safety rated to European Standard (EN) 61010-1, Category III, 600V. The unit has a programmable timer to perform Dielectric Absorption Ratio Tests, Polarization Index (PI) tests, and comparison tests. The tester is powered by eight C batteries (included). The AMB-50 is designed for use by electricians and electrical contractors.
|Power supply||(8) C batteries (included)|
|Insulation resistance range||0 to 1 teraohm|
|Test voltages||500, 1,000, 2,500, or 5,000V DC|
|AC and DC voltage range||30 to 600V|
|Weight (including batteries)||4.4 lbs./2kg|
|Dimensions||202 x 155 x 94mm (H x W x D)|
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meters have electrical properties that are to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test meter has multiple settings corresponding to potential ranges of values for the properties it can measure. A manual ranging meter requires the operator to flip through different settings until the correct range is reached. An autoranging meter cycles through range settings automatically until it reaches the correct range.
Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA.
What’s in the Box?