B&K Precision 881 In-Circuit ESR and DC Resistance Capacitor Tester

Price: $210.00 $178.92
Product prices and availability are accurate as of 2016-09-24 07:19:01 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
You Save: $31.08 (15%)
Availability: In Stock
Add to Cart
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Model 881 is a new portable In-Circuit ESR Meter, the new compact hand-held tester can be used to measure the equivalent series resistance of electrolytic capacitors in or out of circuit and can also be used to measure low value non-inductive resistors. Model 881 is a must for anyone that tests or trouble shoots printed circuit boards. Measures ESR with a range of 0.1 to 30 ohms. Three color front panel chart shows ESR reading s of good, fair, and bad. Measures DC Resistance with a range of 0.1 to 30 ohms. Automatically calibrates internal signal. 15mVp-p Output test voltage (will not turn on any solid state devices). Includes a one-handed tweezers test probe. Uses a standard 9VDC battery as power Source, 100 MHz Bandwidth. Open circuit probe voltage: 15mV pp. Output test frequency: 100 KHz sine wave. Measures ESR range ohm: 0.1 - 30 (25 segment LED bar scale) beeps from 1 to 5 beeps depending on ESR of capacitor. Measures DC Resistance range ohm: 0.5 - 30 flashing the LED. Power: one 9V battery or an external AC adapter (9V DC 100mA 5.5mm x 2.1mm center pin+). Power drain: 10mA typical. Measures 1-1/2" length by 3-51/64" width by 5-11/16" height. 1 year warranty.

Product Features

Measures ESR with a range of 0.1 to 30 ohms Three color front panel chart shows esr readings of good, fair, and bad Measures DC Resistance with a range of 0.1 to 30 ohms Automatically calibrates internal signal 1 Year warranty

Write a Review