Portable optical power meter is an accurate and durable handheld meter designed for the installation, operation and maintenance of optical fibre network. It is a compact device with backlight swich and auto power on-off ability. Besides, it provides ultra-wide measurement range, high accuracy, user self-calibration and universal port. In addition, it displays linear indicators(mW) and non-linear indicators(dBm)in one screen at the same time.
Self calibration by user himself
Rechargeable lithium battery supports continuous work for up to 48 hours.
Linear indicators(mW) and non-linear indicators(dBm) display in one screenUnique
FC/SC/ST universal port(see Figures 1,2), on complex conversion
The product provides three modes, i.e.:factory mode, user mode and working mode, it usually enters working mode.
Serial port commissioning:
Connect serial port plug to PC's serial port, you can access data and calibrate the meter(see the Figure on the right)via PC.
Measurement Range (dBm): -70~+10
Calibrated Wavelength(nm): 850,980,1300,1310,1490,1550
Resolution(dB): Linear indication: 0.1% Loharithmic indication: 0.01dBm
Optical Connector: FC/ Universal 2.5mm adaptor
Power Supply: Alkaline Battery(3 AA 1.5V batteries)
Battery Operating Time: 240 h with 1.5V Battery(3)
Operating Temperature: -10 ~ +60C
Storage Temperature: -25 ~ +70C
Relative Humidity: 0 to 95% (non-condensing)
We have PDF manual of English, if you need it ,please feel free to contact us.
This is a multi-purpose toolkit,it can provides the tools necessary for the assembly of mechanical splices and it will bring you a higher working efficiency.
20 in 1 FTTH Assembly Optical Fiber Termination Tool Kit
New Fiber Optic Cable Handle Optical Power Meter -70~+8 dBm FC SC Tester
This optical fiber cleaver is available with a single fiber adapter for 250um to 900um coated single fibers. Not only easy to remove or install the single fiber adapter,but also alternate between mass and single fiber cleaving.