Flexzion Digital Clamp Meter 600 Amp LCD Multimeter DMM DC AC Voltage Ampere Auto Range Temperature Tester Portable Lightweight for Schools Factories Families and Amateurs UNI-T UT201

Price: $22.99
Product prices and availability are accurate as of 2016-12-09 12:48:56 EST and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Add to Cart
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Clamp meters, also called clamp-on meters, are typically used by electrical engineers to measure properties of electrical current without physically touching or disconnecting the conductor. The digital clamp meter UT201 is a reliable and low consumption Auto/Manual range AC clamp meter, which can be used to measure AC/DC voltage, AC current,residence, continuity test and diode check. It comes with a handy carrying pouch and an easy-to-read large LCD display, and also featues data hold, max reading, auto off functions.

Specification:

  • DC Voltage: 200mV/2V/20V/200V/600V (0.8% +1)
  • AC Voltage: 2V/20V/200V/600V (1.2% +5)
  • AC Current: 20A/200A/600A (1.5 percent +5)
  • Resistance: 200W/2kW/20kW/200kW/2MW/20MW (1% +2)
  • Frequency: 10Hz ~ 1MHz
  • Duty Cycle: 0.1 percent ~ 99.9 percent
  • Power: 1.5V Battery
  • LCD Size: 35.8 x 18mm
  • Product Colour: Red and Grey
  • Diode: YES
  • Continuity Buzzer: YES
  • Data Hold: YES
  • Max/Min Mode: YES
  • Low Battery Display: YES
  • Input Impedance Measurement: 10MW
  • Data Hold: YES
  • Peak Hold: YES
  • Displayer Size: 35.8~18mm
  • Auto Power Off: YES
  • Max. Display: 1999

Package Content:

  • 1x Ftike UT201 Clamp LCD Digital Multimeter Useful DC/AC Current Voltmeter

Product Features

Compact size AC clamp meter, up to 600 amps. Data hold + Maximum value measurement, Auto Range, Low Voltage, LCD Display Jaw opening measures AC current in a conductor up to 26mm without interrupting the circuit Autoranging clamp multimeter designed to test DC AC Voltage, AC Current, Resistance, continuity & diode check True RMS sensing meter provides accurate readings when measuring linear or non-linear loads Continuity buzzer, Data hold, Full symbol display, Auto power off after 15 minutes of inactivity for energy conservation

Write a Review