Range: 0.01pF to 47.000nF / Accuracy: 1%+2Digit / Refresh Time: ~0.2s to 1s
Range: 47.00nF to 47.000uF / Accuracy: 1%+1Digit / Refresh Time: ~0.2s to 2s
Range: 47.00uF to 470.00mF; Accuracy: 1 to 3%+1Digit / Refresh Time: ~0.2s to 30s
Accuracy: Up to 1% (detail on above table)
High Resolution: 5 digit
Battery: 2 x AA 1.5V battery(Not Included)
Operating current: 0.02A
Press and hold the ON/ OFF circle orange button for 1 to 2 second
AUTO/ MANUAL mode
Press and release the RANGE button and at the first line of LCD will show "AUTO:"
At auto mode meter will automatically select the best range to detect.
Scroll the manual range from 47nF, 47uF and 470mF range by press and release the RANGE button, in LCD will show MANUAL at first LCD line and show at second line: 0-47NF, 47NF TO 47UF and 47UF TO 470MF.
1 Key Zero
OPEN circuit the test leads terminal. Press and release the "ZERO" button, LCD shows "ZERO" and wait the zero disappear. If you are using the meter array socket, you need to OPEN circuit to set zero too.
You can use the 8 pin socket to measure the capacitor
It will automatically start running average if the capacitance reading become stable and user can get more accuracy reading.During running average it will show "AVG" at right bottom LCD or it will show raw data icon "RAW", As a result, if you want to get higher accuracy reading, you can take the reading during AVG display. This function will automatically on, once the raw data is noise.
LCD backlight will on during power on
Around 8 to 10 hours for not testing, it will shut down automatically to save power.
OVERFLOW or OL
Display overflow when the value is out of range, you can check that you are zero correctly.
High quality and high accuracy
Larger measuring range,read up to 470mF/ 470000uF
With auto running averaging function, can read pF more stable and accuracy
Easy to use and fast response time on measuring from 0.01pF to 470000uF
Measuring voltage: <0.8V / Clamping voltage: ~1.25V (open voltage)