NETGEAR M4200 Full Power PoE+ 8x2.5G and 2x10G Aggregation Switch for Wave 2 11ac AP Deployment (GSM4210P)

Price: $1,149.99 $1,134.99
Product prices and availability are accurate as of 2016-09-21 19:57:45 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
You Save: $15.00 (1%)
Availability: In Stock
Add to Cart
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

The ProSAFEĀ® M4200-10MG-PoE+ Managed Switch was designed from the ground up to optimize the installation of Wave 2 11ac access points. Includes eight full power PoE+ and multi-speed 1G, 2.5G ports for 100 meter legacy cable runs, combined with two 10G uplinks for a fully non-blocking deployment of eight Wave 2 11ac access points. Two of these eight 1G, 2.5G PoE+ ports also support 5G speed. NETGEAR Multi-gigabit Ethernet is compatible with most major wireless and switching vendors managed solutions, and the only one with 8x2.5G to the AP with 240W PoE available and 2x10G line-rate aggregation to the wiring closet. Plenum rated, slim design and mounting accessories allow you to place this switch to optimize access point placement and cabling efficiency, inside and outside the rack.

Product Features

Provide eight full power PoE+ and multi-speed 1G, 2.5G ports combined with two 10G SFP+ uplinks Allow for a fully non-blocking deployment of eight Wave 2 11ac access points, with 240W PoE budget 8x2.5G to the access points and 2x10G line-rate aggregation to the wiring closet

Write a Review