Newest model supports 960p AHD2.0 cameras models vs Old model only support 960p AHD camera test
Newer model supports Multi-language OSD:English/Chinese/Russian/Deutsch/France/Spanol/Portugal/
Classic series. Highly equipped, the most cost effective choice.
(1) Seventh generation 4.3inch LTPS LCD screen.
User can check the details of camera video during the process of installation.
(2) Equipped with 2600mAh Li-polymer battery, which has RoHS & CE certification.
Device can work 7 hours after a single charge.
12V 1A Output function can be helpful when no external power supply for the camera.
Video test Automatically identification with access AHD Video signal
Automatic identification NTSC/PAL Format image signal
Network Cable test
Chipest: Nextchip NVP6114A
Video System: NTSC/PAL Automatically recognize
Display screen: 4.3inches
Display screen Resolution: LCD 480*272P resolution
Screen adjustment: Video display brightness, contrast saturation adjustable
Video input: 1 channel BNC Video IN
12V power output 1A DC:Audio test
Input audio signal, and played on the internal speaker
External power supply:DC 5V,1A
Battery-powered: Built-in 3.7V li-polymer battery, Capacity 2600mAh
Charge time: 4hours
Battery working time 7 hours
Power saving features:
Low power consumption, automatic power off, Real-time display of battery level
Language settings: Chinese, English user selectable
Auto power off: Disable / 5-60 minutes
Dimension:120mm x 80mm x 40mm,150g
Eyoyo supplies a variety of CCTV cameras and AHD cameras tester Monitor. These portable service monitors are one of the most convenient tools that a CCTV installer can have with him when performing an installation. Professional installers often refer to these devices as an LCD field monitor or CCTV field monitor.
These valuable tools make focusing a cameras a one man job instead of two. Typically without the use of a service monitor, a CCTV installer would need another installer looking at the main monitor of the surveillance system being installed and communicating to the installer the is mounting and focusing the camera when the camera is in good view and focus.
By using a test monitor on the job, one installer can mount and focus CCTV cameras by connecting each camera one by one to the service monitor on the installers arm or wrist.
Built-in power output to camera is extremely useful during camera installation,be able to mount and focus camera without permanent power source in place.
Newer model supports Multi-language OSD:English/Chinese/Russian/Deutsch/France/Spanol/Portugal