Do you want to find multitool multimeter to save more?
Do you love to fix things rather than throw them away?
?Tacklife DM01M Advanced Version Multimeter is an auto ranging digital device that can accurate measure AC/DC voltage and current, resistance, continuity and diode. Temperature,capacitance and live line test.
?6000 counts display, True RMS, 600V CAT IV, 1000V CAT III, double fuse wire for safety. And when it comes to electronics you need the right testing tools to make sure you're replacing the correct part.
?This multimeter can help you that. From as little as checking household fuses to checking car wiring and battery voltage, this cost effective Voltmeter is a must and easy to use after reading the supplied instructions.
• DC Voltage Range and Accuracy: 600mV/6V/60V/600V ±(0.5%+3), 1000V ±(0.5%+3)
• AC Voltage Range and Accuracy: 6V/60V ±(0.8%+3), 600V/750V ±(1%+10)
• DC Current Range and Accuracy: 60?A/60mA/600mA ±(0.8%+3), 10.00A ±(1.2%+3)
• AC Current Range and Accuracy: 60mA/600mA ±(1%+3), 10A ±(1.5%+3)
• Resistance Range and Accuracy: 600?/6K?/60K?/600K?/6M? ±(0.8%+3), 60M? ±(1.2%+3)
• Capacitance Range and Accuracy: 6nf/60nf/600nf/6uf/60uf/600uf/6MF ±(4.0%+3), 100MF ±(5.0%+3)
• Temperature Range and Accuracy: -20?-1000?/-4?-1832? ±(1.0%+3)
• Display: 6000 counts
• Hold Mode: ?
• Flashlight: ?
• Back light: ?
• Auto power off:?
• NCV test: ?
• Live line test:?
• Diode test: ?
• Beep continuity test:?
• Frequency test:?
• Continuity: ?
• Transistor: ?
• Live Line testing: ?
• Over load protection: ?
• Short-circuit protection: ?
1x Tacklife DM01M Digital Multimeter
4x 1.5V AA Batteries
1x English User's Manual
2x Test Lead
1x K-Type Thermocouple
1x 24-month Warranty
Major Parameter: Measures DC Voltage to 1000V, AC Voltage to 750V, AC/DC Current to 10A, resistance to 60M?, capacitance to 100mF, 6000 counts display, True RMS, 600V CAT IV, 1000V CAT III, double fuse wire for safety.
Temperature Measuring & Flashlight: The maximum measuring temperature for the K-type thermocouple dispatched at random is 482°F and it instant measuring value can reach 572°F. The operator can access measurement result in a dark place with the flashlight.
NCV Detection & Live Line Test: If the meter detects the AC voltage, the indicators for signal density (high, medium and low) will be on in accordance with the detected density, while the beeper will sounds alarms at different frequencies.
Beep Continuity Test with LED: If the measured distance is no more than 40?, the sensor LED (green indicator) will be on and the beeper will sound continuously. If the measured resistance is between 40? and 60?, the sensor LED (red indicator) will be on.
Package Content: Tacklife DM01A Digital Multimeter , 1.5V AA Batteries, English User's Manual, Test Leads, K-Type Thermocouple, 24 Months Warranty.(If you need manual of PDF pls contact me.)