TES 46 CAT-5 Lan Cable Tester, the LAN Cable Tester is an easy and effective cable tester with the ability to identify cable failures, check wiring, and measure cable length in the UTP (Unshielded twisted pair cable), FTP (Foil - screened (shielded twisted pair cable) cables, and COAX (coaxial cable) cables.
It not only identifies wiring faults, such as open wires, shorted wires, miswires and split pairs, but also tests up to 8 different cables at one end.
A stored cable library provides quick access to common cable types.
U.S. Pat. No. Des. 446,135
●Display : Large size LCD display.
●Connector : RJ45 and BNC
●Category : CAT3, CAT4, CAT5, User-Calibration.
●Faults Status : Opens, Shorts, Reversed, Crossed, Split Pair.
●Input Protection : The inputs withstand telephone ringing and loop voltages.
●Size / Weight : 150mm× 72mm × 35mm / Approx. 215g
●Environment Conditions : Operating : 0℃ to + 40℃ , Storage : -20℃ to + 60℃
●Power : Six AAA size 1.5V batteries.
●Battery Life : 100 hours. (alkaline battery)
●Auto Power off : 5 minutes, (When there is no key activity).
●Accessories : Instruction manual , Carry case , One UTP Category 5 patch cable,One RJ45F - RJ45F female coupler, Cable identifier #1 for the verification of the wire map. (Optional 1 for #2, #3 & #4) (Optional 2 for #5, #6, #7& #8 )
！ Notice ！
*Customers have to pay customs duties and taxes for international shipment
Tests : UTP. FTP. Coax cables, two, three, or four wire pairs in twisted pair cables and test all category UTP cables and hardware.
Verify end-to-end connectivity per EIA/TIA 568 wiring standard.
Detects wiring problems : Opens, Shorts, Miswires (Crossed, Reversed, Split pair).
Locates wiring/connection errors (distance to the open or short)
Can identify up to 8 different cables at one end by provided remote identifiers.