The power supply tester is a robust voltage tester for a computer's power supply. ATX, BTX and TX-compliant power supplies can be tested. The PC/SPS is suitable for
anyone, from computer enthusiasts as well as for a quick functional check in specialized trade.
*Power input for 20 / 24 pin ATX Molex connector
*Prevent accidental damage to your hardware parts
*Quick and easy testing for power supply
*LCD represents Power Voltage Data and determine working properly
*Built-in 25W 5.4 Ohm load generates steady outputs
*Individual +3.3V, +5V and 12V LEDs for voltage output metering which indicate power supply is working or not
*Voltage Source: 20/24 (ATX-connector)
*Voltage test: +12V,-12V,+5V,-5V,+3.3V,5V Stand by (SB) 12V power Good (PG)
*Connectors: Floppy, HDD, CDROM, SATA, 4pin(P4), 8pin(Dual-CPU), 6pin(PCI-Express)
*Size: 5 x 2.5"
*Weight: 5.95 oz
1. The SD power supply tester is a robust voltage tester for PC-power supply, ATX . BTX and ITX compliant, power supplies can be tested. LCDs indicate the status of voltage.
2. The PC / SPS is suitable for the ambitious hobby user, as well as for a quick functional check in specialized trade.
3. Plug power supply 24 PIN and P4 , P6 or P8 into the corresponding jack of the power test suite.
4. If a certain voltage signal was not detected, or the detected voltage value over the normal, will issue a "DuDu" long buzzer ; if the corresponding voltage value or PG
flicker too, then the power is failed.
LCD COMPUTER PC POWER SUPPLY TESTER FOR 20/24 4/6/8 PIN SATA IDE HDD ATX ITX BTX This power supply tester is the ultimate tool for all computer repair people. It comes with an 8-in-1 ATX power supply tester that outputs the voltage levels of your connectors to a 1.8 inch screen that is built into the device!
You can accurately detect problems with power supplies and prevent damage to your motherboard. Will test 20, 24pin, 4-pin power, SATA, Floppy Power, PCI-e, 4-pin, ATX12V, and 8-pin connectors.
Power on the supply of power, you will hear "DuDu" ring , if no flicker then the power supply output voltage is normal.
Older model power supplies are easily tested on this power supply tester because it accepts the 20 pin atx connector and is able to detect the -5V circuit. As far as new power supplies go, this tester is up to the task because it can test 8 pin cpu, pci express, and sata. This power supply tester weighs only 3.5 ounces and is only 5/8 inches thick so it fits good in your toolbox.
Features:Voltage Source 20/24 pin connector. 1.8 Inch Screen.Screen tells you outputted voltages for your connectors.