Zoostliss FTTH Fiber Optic Tool Kit with Medidor Fibra Optic Power Meter APM820 and Visual Fault Locator and Cable Cutter Stripper FC-6S Fiber Cleaver 5M Tape

Price:
Product prices and availability are accurate as of 2017-08-22 11:06:21 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Portable optical power meter is an accurate and durable handheld meter designed for the installation, operation and maintenance of optical fibre network. It is a compact device with backlight swich and auto power on-off ability. Besides, it provides ultra-wide measurement range, high accuracy, user self-calibration and universal port. In addition, it displays linear indicators(mW) and non-linear indicators(dBm)in one screen at the same time.
Self calibration by user himself
Linear indicators(mW) and non-linear indicators(dBm) display in one screenUnique
FC/SC/ST universal port(see Figures 1,2), on complex conversion
APM820 can provide the accurate power measurement in optical field;
Wide dynamic range: +10~-70 dBm; High resolution: 0.01dB;
Good accuracy: 0.01dB±2%;
APM820 provide the reference for laser source and variable attenuator;
test the loss of the fiber;
Users can replace the adaptor from FC to SC; 850nm, 1300nm, 1310nm, 1490nm,1550nm test point;
APM820 is for telecom test, APM830 is for CCTV test; Energy save mode: about 10 minutes no operation will cause the device auto power off (can be cancelled);
Reference value set for each wave;
Full energy can support above 100 hours operation;

Product Features

High quality FTTH Fiber Optic Tool Kit This is a multi-purpose toolkit, it can provides the tools necessary for the assembly of mechanical splices and it will bring you a higher working efficiency. 1mW Visual Fault Locator Fiber Optic Cable Tester Meter for CATV The FC-6S fiber optic cleaver is used for single fiber cleaving. This FC-6S optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving. APM820 can provide the accurate power measurement in optical field; Wide dynamic range: +10~-70 dBm,High resolution: 0.01dB; Good accuracy: 0.01dB±2%; Fixed length guide rail groove 2 1: Can be used for indoor cable stripping coating layer and positioning length It can be used to locate the indoor cable into the optical fiber cutting knife

Write a Review