Portable optical power meter is an accurate and durable handheld meter designed for the installation, operation and maintenance of optical fibre network. It is a compact device with backlight swich and auto power on-off ability. Besides, it provides ultra-wide measurement range, high accuracy, user self-calibration and universal port. In addition, it displays linear indicators(mW) and non-linear indicators(dBm)in one screen at the same time.
Self calibration by user himself
Rechargeable lithium battery supports continuous work for up to 48 hours.
Linear indicators(mW) and non-linear indicators(dBm) display in one screenUnique
FC/SC/ST universal port(see Figures 1,2), on complex conversion
APM820 can provide the accurate power measurement in optical field;
Wide dynamic range: +10~-70 dBm; High resolution: 0.01dB;
Good accuracy: 0.01dB±2%;
APM820 provide the reference for laser source and variable attenuator;
test the loss of the fiber;
Users can replace the adaptor from FC to SC; 850nm, 1300nm, 1310nm, 1490nm,1550nm test point;
APM820 is for telecom test, APM830 is for CCTV test; Energy save mode: about 10 minutes no operation will cause the device auto power off (can be cancelled);
Reference value set for each wave;
Full energy can support above 100 hours operation;
High quality FTTH Fiber Optic Tool Kit
This is a multi-purpose toolkit,it can provides the tools necessary for the assembly of mechanical splices and it will bring you a higher working efficiency. 1mW Visual Fault Locator Fiber Optic Cable Tester Meter for CATV
The FC-6S fiber optic cleaver is used for single fiber cleaving. This FC-6S optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving.
APM820 can provide the accurate power measurement in optical field; Wide dynamic range: +10~-70 dBm,High resolution: 0.01dB; Good accuracy: 0.01dB±2%;
Fixed length guide rail groove 2 1: Can be used for indoor cable stripping coating layer and positioning length It can be used to locate the indoor cable into the optical fiber cutting knife