K24 turbine flow meter:
Medium: Methanol Diesel Gasoline Kerosene Liquid Water
1 inch internal thread
Measurement accuracy ±1%
Working pressure 10BAR
Standby time 2 years
Flow range 10-100L/MIN
Single counting 0.00-9999.9
The total number of accumulated 0.00-99999.9
Units of measurement l/L, gallons/GAL, pints/PTS, quarts/QTS
Single metering cleared
1 .How to set the Measurement unit?
In standby mode, or the currently displayed mode,press the MENU + RESET key for 5 seconds at the same time.
Entering the unit conversion settings, press RESET button, sorted by LTR PT QT ? ? ? ? GAL LTR select a unit of measurement, and add the cumulative amount according to the current measurement unit conversion display. Press the MENU key again for 3 seconds,Finally exit the unit conversion settings.
2 . Calibration of Error coefficients
In standby mode, or the currently displayed mode,press the MENU key for 3 seconds, enter into Calibration of Error coefficients mode. While the first digit flashes, press MENU button, the digital shift, (flashing digital displacement), Press RESET button, modify the value of the current Flash, and from 0 to 9 and then to 0. When this data up, the output oil is less; when the data drops, the output oil is more. Press the MENU button 3 seconds end error coefficients ' calibration. Return to displaying the current charging status, and is currently filling the display to zero. After the error coefficients ' calibration, if new measurement pulse input, use new error coefficients of calibration. Error coefficients ' calibration range: 0.1000-9.9999. Press the MENU +RESET button, view the coefficients and the total cumulative
Can be applied: methanol diesel gasoline kerosene liquid water
1 inch female stainless steel, digital display, easy installation
Flow range 10-100L/MIN /Measurement accuracy ±1%/Repeatability ±0.5%
Digital display: single counting 0.00-9999.9/total number of accumulated 0.00-99999.9
Multiple unit switching display?L/GAL/PTS/QTS/