The series product of mobile light power is mainly used in conductive light signal power.
It is widely used in construction and maintenance of optical cable,
optical communication and optical sensor and optical CATV, etc.
1. Test Range: -70~+3dbm
2. Type of detector: InGaAs
3. Wavelength Range: 800~1700nm
4. Standard Wavelength(nn): 850/980/1300/1310/1490/1550/1625
5. Display Resolution: Linear Display 0.1%; Logarithmic display 0.01dBm
6. Working Temp(?): -10~+60?
7. Storage Temp(?): -25~+70?
8. Auto Switch-off Time(min): 18min
9. Battery working period: ?48hrs
10. Power: 3x AA rechargeable lithium battery or chargeable Li-battery (battery not included)
1 x Fiber Cleaver FC-6S
1 x Optical Power Meter and Pocket
1 x SC Adapter
1 x Visual Fault Locator
1 x Fixed-length Fiber
1 x CLAUSS Fiber Optic Stripper CFS-2
1 x Fiber Optical Stripping Tool Pliers
1 x Screwdriver
1 x Wiping Paper
1 x Cotton Swabs
1 x Alcohol Bottle
1 x Fiber Optical Red Test Pen with Lanyard and Bag
3 x Hexagonal Socket Wrench (1.5mm, 2mm, 2.5mm)
1 x Black Carry Bag (24.5x17x9.5cm)
Note: This item can't cut the material of fiberglass or glass fiber.
the FC-6S fiber cleaver is only used for cold connector,can not used with the fiber splicer.
Self calibration, multi-purpose tool kit.
More than 48 hours continuous working time, backlight available.
Support FC/SC/ST interface and quick auto switch.
Linear Display (mW) and Logarithmic display (dBm) show on the same screen.
Please contact us to get the PDF English manual if you need.