Our suppliers have 16 years of experience in meter development and production, focusing on productingf high-quality and safe products.
The clamp meter MT200 can only test the AC current.
If you want to test the AC /DC current, we would like to recommend the digital multimeter PM8233B and MS8232.
non-contact AC current detection: open the clamp head and clamp one cable of
the measured circuit then you can get the data, without the help of other tools.
DC Voltage range and accuracy: 1-600V ±(0.5%+3)
AC Voltage range and accuracy: 1-600V ±(0.8%+5)
AC Current range and accuracy: 6/60/400 A ±3%+8; 400A-600A ±3.5%+10
Resistance range and accuracy: 6k?/60k? ±(0.8%+3)
Display: 6000 counts
Automatic shut-down: 10 min
Back light: 1 min
Sampling time: about 3 times / sec
Overrange display: '0L' or '-0L'
Polarity indication: '-' indicates negative polarity
Short circuit buzzer :?
Dimensions: 7.4*2.8*1.5 in
Power: 2 x 1.5V AAA Batteries
Safety Rating: CE CAT.III 600V RoHS
1* Clamp Multimeter
1* Pair Test Leads
1* English manual
1* Carry Case
2 * 1.5V AAA Batteries
1. Before opening the meter case or battery cover, remove the test leads from the circuit under test.
2. Use a damp cloth and a mild detergent to clean the meter, do not use abrasives or solvents.
3. When you're using the MT200 to test current circuits, make sure to separate and single out
the cable/wire you want to measure. Cables on the market currently bundle live and null
wires together which makes accurate measurements difficult, if not impossible.
"Non-contact"AC current detection -- The NCV function can detect the exist of AC current without touching the circuit, with short circuit protection and buzzing tips(<50?), successfully avoid potential safety hazards during operation.
"Overload protection"& Rapid measurement -- Accurate measurement of 6000 counts AC / DC voltage, AC current, resistance, diodes, connectivity, etc. in 1 second. (No DC current measurement)
Measurement range up to "600V" & "600A" -- Large voltage and current test range can help you solve a variety of automotive and household appliances, you do not need to worry about the measure range limits and security issues.
Automatic shutdown & Backlit -- Data hold & automatic shutdown(10 min) & low power display provide a simple measure method. The backlit function allows you to operate easily even in the dark.
"24 months warranty" -- MT200 are in accordance with CE ROHS ETL CAT.? 1000V standard. Contains Clamp meter MT200, test leads, "batteries", English manual, packing boxes. As a customer of Aidbucks, you will enjoy our lifelong technical support and service!