DBPOWER CEM DT-156 Coating Paint Thickness Tester F/NF Probes 1250um Integrated Car Painting Coat Gauge Meter

Price: $159.99
Product prices and availability are accurate as of 2017-12-13 10:00:36 GMT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Introduction:

This economical coating thickness gauge integrated magnetic induction principle and eddy current principle. Memory 320 values;Statistic display AVG,MAX,MIN,S.DEV, NO.With software and USB interfac

Features:

•Non-magnetic coating on steel
•Insulating coatings on no-ferrous metals
•No-ferrous metals coatings on insulating substrates
•Menu operation system
•Two measuring mode: CONTINUR and SINGLE mode
•Two working Mode: DIRECT and GROUP mode
•Statistic Display: AVG,MAX,MIN,NO.,S.DEV
•One point calibrating,two points calibrating and basic calibrating easily
•Memory for 400 readings (80 DIRECT and 320 GROUP readings)
•Delete single readings and group readings easily
•High alarm and low alarm for all working mode
•Low battery error indication
•USB interface for PC software (windows 98/2000/xp/vista)

Specifications:

•Two measuring mode: CONTINUE and SINGLE mode
•Two working Mode: DIRECT and GROUP mode
1. Sensor probe F
•Working principle: Magnetic induction
•Measuring range: 0 to 1250um
•Guaranteed tolerance (of reading): (+/- 3%+1)um
•Low range Precision: 0.1um
•Minimum curvature radius: 1.5mm
•Diameter of Minimum area: 3mm
•Basic critical thickness: 0.5mm
2. Sensor probe N
•Working principle: Eddy current principle
•Measuring range: 0 to 1250um
•Guaranteed tolerance (of reading): (+/- 3%+1.5)um
•Low range Precision: 0.1um
•Minimum curvature radius: 3mm
•Diameter of Minimum area: 5mm
•Basic critical thickness: 0.3mm
•Dimensions: 113.5mm * 54mm * 27mm(H*W*D)

Product Features

TWO TYPES OF PROBE EQUIPPED. Fe & No Fe to Measuring Coatings. Non-magnetic coatings (e.g. paint, zinc) on steel, insulating coatings (e.g. paint, anodizing coatings) on non-ferrous metals. Menu operation system HIGH PRECISION AND FAST GAUGE. Wide measuring range (0-1250um/0-50mil). It works either on the magnetic induction principle or the eddy current principle, depending on the type of sensor probe selected (Fe or No Fe). Two measuring modes: Continue & Single. Two working modes: Direct & Group (4 groups) MAX 400 DATA MEMORY. One point calibrating and two points calibrating independently for each working mode. Statistic display: AVG, MAX, MIN, S.DEV. LCD with blue backlight. V-groove in the sleeve of the probe facilitates reliable measurement on small cylindrical parts. Probe made of hard and durable material HIGH AND LOW ALARM. Low battery and error indication, auto power off (can be disabled), substrates & calibration foils included, USB cable and software CD included (compatible with Windows 98/2000/XP/Vista/7) WIDELY USE. It is ideal for manufactures and their customers, offices and specialists, paint shops, chemical, automobile, shipbuilding, aircraft industries and light and heavy engineering. It is also suitable for laboratory, workshop, and outdoor use

Write a Review