Product Name: optical power meter
Wavelength range: 800~1700nm
Probe type: InGaAs
Power measurement range: -70~+10db
model name:10mw visual fault locator
Universally connector for test different ST,SC,FC interfaces
Test for both single-mode and multi-mode cables with optional 2.5mm fiber optic(Standard) connectors to 1.25mm adapter(Optional)
High effective power circuits allow for stable power
Fiber Optic Cleaver FC-6S:
Coating Diameter: 0.25mm - 0.9mm (Single)
Cladding Diameter: 0.125mm
Cleave Length:9mm - 16mm (Single Fiber - 0.25mm coating)
10mm - 16mm (Single Fiber - 0.9mm coating)
Typical Cleave Angle: 0.5 Degrees
Typical Blade Life: 36,000 Fiber Cleaves
Number of Steps for Cleave: 2
Blade Adjustments Rotational & Height
Note:the FC-6S fiber cleaver is only used for cold connector,can not used with the fiber splicer.
250 ?m coated fiber of 125 ?m fiber
Opening at the top of 1.98mm can be used for stripping fiber outer
The jaw factory has been adjusted, shall not be adjusted
Will not damage optical fiber
green fiber stripping tool:
Universal Stripper for 3.1x2.0mm FTTH drop cables with steel wire or FRP strength member.
Made of zinc alloy steel with PVC non-slip handle. Improve cable splicing, more efficient and easy to use.
1.small fiber tool bag
2.grey optical power meter(-70~+10dBm)
3.Visual Fault Locator VFL-10
4.FC-6S fiber cleaver
5.Fiber Optic Stripper Clauss CFS-2
6.green fiber stripping tool
8.other fiber accessories.
If you have any questions about the product or service, please feel free to contact us.
This is a multi-purpose tool kit,it can provides the tools necessary for the assembly of mechanical splices and it will bring you a higher working efficiency.Fiber quick assembly connector tool kit is ideal for fiber optic termination.
10mW aluminum alloy visual fault locator fiber optic cable tester meter for CATV test,Universally connector for test different ST,SC,FC interfaces
Handheld fiber optical power meter FC,SC cable tester,Wavelength range: 800~1700nm,Power measurement range: -70~+10db
The FC-6S fiber optic cleaver is used for single fiber cleaving. This FC-6S optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving.
Fiber stripping pliers sharp blade, easy to cut fiber; handle design, easy operation