High effective power circuits allow for stable power
All-in-one fiber optic power meter
Wavelength range: 800~1700nm
Probe type: InGaAs
Power measurement range: -70~+10db
Fiber Optic Cleaver FC-6S:
Coating Diameter: 0.25mm - 0.9mm (Single)
Cladding Diameter: 0.125mm
Cleave Length:9mm - 16mm (Single Fiber - 0.25mm coating)
10mm - 16mm (Single Fiber - 0.9mm coating)
Typical Cleave Angle: 0.5 Degrees
Typical Blade Life: 36,000 Fiber Cleaves
Number of Steps for Cleave: 2
Blade Adjustments Rotational & Height
Note:the FC-6S fiber cleaver is only used for cold connector,can not used with the fiber splicer.
250 ?m coated fiber of 125 ?m fiber
Opening at the top of 1.98mm can be used for stripping fiber outer
The jaw factory has been adjusted, shall not be adjusted
Will not damage optical fiber
green fiber stripping tool:
Universal Stripper for 3.1x2.0mm FTTH drop cables with steel wire or FRP strength member.
Made of zinc alloy steel with PVC non-slip handle. Improve cable splicing, more efficient and easy to use.
1.Small fiber tool bag
2.FC-6S fiber cleaver
3.Fiber Optic Stripper Clauss CFS-2
4.Green fiber stripping tool
5.All in one fiber optic power meter 10mW.6. Dust-free 7.250mL Alcohol bottles 8.Other fiber accessories.
The all in one fiber optic power meter is the Combination of the optical power meter and 10mW Visual Fault locaotr.
Fiber Optic Cleaver FC-6S(Coating Diameter: 0.25mm - 0.9mm (Single));Note:the FC-6S fiber cleaver is only used for cold connector,can not used with the fiber splicer.
FTTH fiber optic drop cable stripper is used to peel 250?m coating of 125?m fiber optic
This is a multi-purpose tool kit,quick assembly connector tool kit. It can provides the tools necessary for the assembly of mechanical splices and it will bring you a higher working efficiency
Operates either in CW or Pulsed