Portable optical power meter is an accurate and durable handheld meter designed for the installation, operation and maintenance of optical fiber network. It is a compact device with backlight switch and auto power on-off ability. Besides, it provides ultra-wide measurement range, high accuracy, user self-calibration function and universal port. In addition, it displays linear indicators (mW) and non-linear indicators (dBm) in one screen at the same time.
Measurement Range (dBm): -70~+10
Calibrated Wavelength(nm): 850,980,1300,1310,1490,1550
Resolution(dB): Linear indication: 0.1% Loharithmic
Optical Connector: FC/ Universal 2.5mm adaptor
Power Supply: Alkaline Battery(3 AA 1.5V batteries)
Battery Operating Time: 240 h with 1.5V Battery(3)
Operating Temperature: -10 ~ +60C
Storage Temperature: -25 ~ +70C
Relative Humidity: 0 to 95% (non-condensing)
This is a multi-purpose toolkit,it can provides the tools necessary for the assembly of mechanical splices and it will bring you a higher working efficiency. 1mW Visual Fault Locator Fiber Optic Cable Tester Meter for CATV
The skl-6c fiber optic cleaver is used for single fiber cleaving. This SKL-6C optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving.
New Fiber Optic Cable Handle Optical Power Meter -70~+10 dBm FC SC Tester
Fixed length guide rail groove 2 1: Can be used for indoor cable stripping coating layer and positioning length It can be used to locate the indoor cable into the optical fiber cutting
This is a multi-purpose toolkit,it can provides the tools necessary for the assembly of mechanical splices and it will bring you a higher working efficiency.