FTTH Splicing Splice Fiber Optic Stripping Tool Kits With Fiber Cleaver FC-6S

Price: $65.00
Product prices and availability are accurate as of 2018-04-25 21:29:30 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually ships in 4-5 business days
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Specifications: Type: Fiber Cleaver FC-6S Fiber diameter: 125um Coating diameter: 250um - 900um Typical splitter angle: 0.5 degrees Adjust the peeling length is: 5~20mm Length of the slit: 9-16mm, 10-16mm Blade Lifetime: 36,000 columns (3,000 per blade position) Features: 1. CFS-2 Fiber Stripper: - 250 um coated layer of 125 um fiber with A. - Opening the top of the B. 1.98mm can be used for stripping fiber outer sheath - The open hole of the type V and 140 um on the edge of the - Clamp can be used to strip the 250 um layer of 125 um fiber - Jaw factory has been adjusted, shall not be adjusted - Will not damage the fiber - All the cutting cross section has precise mechanical tolerances to ensure a clean and smooth operation - According to the handle ergonomic design, comfort grip - Does not use the blade, locked in a closed state 2. Wire Stripper: - The use of temperature is -20 ° C ~ 50 °C - Factory pre-set, no need to adjust this stripper again to prevent fiber scratch; cutting blade precision positioning, quenching and tempering treatment, anti-rust primer. - If not use, set the blade lock in the closed state. - For stripping 250 micron buffer coating to expose 125 micron cladded fiber - Second hole for stripping 2-3mm fiber jackets - 140 ?m diameter hole and V-opening in blade allows removal of 250 micron buffer coating from 125 micron fiber - Pre-set at the factory - no adjustments needed - Will not scratch or nick glass fiber - All stripping surfaces are manufactured to precise tolerances to assure clean, smooth strips - Comfort-grip, ergonomic handles 3. FTTH Fiber Optic Stripping Tool Kits designed for the installation, operation and maintenance of optical fiber network Package Included: 1 x Fiber Cleaver FC-6S 1 x Fiber Optic Stripper CFS-2 1 x Fiber Optic Stripping Tool Plier 1 x Fixed-length Fiber Optic Wire Stripping 1 x Fiber Coating Stripper Cutting Guiderway 1 x Phillips Screwdriver 1 x Large Hex Wrench 1 x Medium Hex Wrench 1 x Small Hex W

Product Features

Specifications: Type: Fiber Cleaver FC-6S Fiber diameter: 125um Coating diameter: 250um - 900um Ty pical splitter angle: 0.5 degrees Adjust the peeling length is: 5~20mm Length of the slit: 9-16mm, 0-16mm Blade Lifetime: 36,000 columns (3,000 per blade position) Features: 1. CFS-2 Fiber Strippe : - 250 um coated layer of 125 um fiber with A. - Opening the top of the B. 1.98mm can be used for tripping fiber outer sheath - The open hole of the type V and 140 um on the edge of the - Clamp can

Write a Review