The GS-4210-16UP4C is an Ultra PoE Managed Switch that can provide up to 60 watts of 802.3bt output power via its 16 10/100/1000BASE-T interfaces. The unit also features 4 additional Gigabit TP/SFP combo ports. With a total power of up to 400 watts, the GS-4210-16UP4C provides a cost-effective Ultra PoE networking solution for small businesses and enterprises. The Ultra PoE Managed switch features intelligent PoE functions to improve PoE power management. The unit also provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine. The GS-4210-16UP4C Ultra PoE solution adopts the IEEE 802.3at/af standard. Instead of delivering power over 2 twisted UTP pairs - weather it be end-span (Pin 1, 2, 3 and 6) or mid-span (Pin 4, 5, 7 and 8), the unit can provide up to 60 watts of power by using all the four twisted pairs of a standard Cat.5e/6 Ethernet cabling. To power the four twisted pairs, two PSE controllers are used to power both the data and the spare pairs. The GS-4210-16UP4C can be configured to have each of the connected PoE IP cameras or PoE wireless access points reboot at a specified time each week. This will reduce the likelihood of IP cameras or AP crashes resulting from buffer overflow. The GS-4210-16UP4C can be configured to monitor connected PD (Powered Device) status in real time via ping requests. With the PD Alive Check feature, if the PD stops working and responding, the GS-4210-16UP4C will resume the PoE port power and reactivate the PD back to work. The unit simplifies power management with its automated PoE port's resetting of the PD's power source.
Ports: 16 10/100/1000TX Ultra PoE + 4 100/1000TX TP/SFP
Standards: 802.3af/at, Ultra PoE/802.3bt Ready
Total PoE Budget: 400 Watts (max.)
Power Consumption: Max. 500 Watts/1706 BTU
Operating Temperature: 0-50°C