Brand new in the box SPARC regulator / flow meter combos. Great for MIG and TIG welding. *CGA580 Bottle Inlet Connection - Fits standard argon, helium, nitrogen, and argon/CO2 style gas bottles from any supplier *Adjustable output flow is from 10 to 60 cfh (cubic feet per hour) at a preset 50psi, and is indicated by a ball which moves up and down in the flow tube, so this flowmeter will handle MIG and TIG welding both steel and aluminum. *Outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It also comes with a standard 1/4" barbed fitting. If you have a Miller, Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut. *There are NO GASKETS or WASHERS to get the fittings to seal like other cheaper regulators sold here on Amazon that do not use the standard N-24 nut and NP-72 outlet nipples. *The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi. This flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators. Package Includes: (1) Flow Meter (1) Set of adapter fittings. One year warranty against manufacturing defects.
CGA580 Bottle Connection for argon and argon blend bottles
Outlet will fit both female 9/16" x 18 nut or the male 5/8" x 18 fitting
1/4" Hose Barb Included
0-4000psi Pressure Gauge for monitoring bottle pressure
10-60 CFH Flow Meter Scale