Why You Need wire splitter or line separator to measure the current ? The answer is : All the clamp meter can measure current on a single wire only, if you put the two wires in the clamp jaw, the reading will be zero, Only from one wire, you get a reading. This splitter virtually splits the wire and you clamp on the splitter around one wire.
The TP202A(Uni-T UT202A) is an Auto/Manual range AC clamp meter, it can be used to measure AC/DC voltage and AC current. Also you can use it to measure resistance, continuity test & diode check. For your convenience, it comes with an essential piece of accessory needed for measuring AC current, a line splitter M920, which is retailed for $15.
Display: 1999 COUNTS
DCV : 200m/2/20/200 ± 0.8% 600V ± 1.0%
ACV: 2/20/200 ± 1.2% 600V ± 1.5%
ACA: 20A ± 2.0% 200A ± 1.5% 600A ± 2.0%
Resistance: 200 ohm ± 1.2% 2K/20K/200K ohm ± 1.0% 2M ohm ± 1.2%, 20M ohm ± 1.5%
MAX. Diameter for conductor: ?26 mm
Dimensions: 194 x 72 x 35 mm
Weight: APPROX. 200g (including battery)
What's in the box:
202A clamp meter: 1
M920 line splitter: 1
Test leads: 1 pair
User manual: 1
Carrying pouch: 1
9V Battery: 1 (installed)
Tekpower is a registered trademark in the United States, any unauthorized use of our trademark is a violation of both Federal and State trademark laws and could subject to liability for damages and penalties.
UT202A, Compact size AC clamp meter, up to 600 amps, a line splitter included
UT202A,AC/DC voltage, resistance, continuity & diode check
Data hold + Maximum value measurement
Carrying case included
30 days money back guarantee and 1 year limited warranty