1.Use as Circuit Tester
Connect two alligator clips to the ends of the wire to check if resistance exists. If yes, the wire could be a short or open circuit. You can use the Wire Tracer function to locate the problem.
2.Use as a Wire Tracer
By sending a signal down the wire being tested, you can trace the wire with the detector probe. An audible tone will increase in volume as the probe gets closer to the wire. Even when you have a bundle of wires, you can still find the wire you wish to trace with the help of the volume knob.
3.Low Battery Capacity Indication
Move the function selector switch of the emitter to the “SCAN”position,when the cell voltage is below 6.0V?the STATUS indicator and the VERIFY indicator of the emitter can flash at the same time.
1.Power specs:DC,9V laminated battery( included)
2.Max. operating current:Emitter ?10mA; Receiver?30mA
3.Signal transmission format: Multi-frequency pulse
4Signal output level:8Vp-p
5.Signal transmission distance:.?3km
Telecommunication network, line engineering and routine maintenance; Computer network line engineering;Other metal wire wiring works and maintenance work;
Scope of Applications:
Internet Cafe,Hotel network room,Electric power repair,Monitoring installation,Network line engineering
1 * emitter,1 * receiver,1 * earphone,1 * RJ11 adapter,1 * RJ45 adapter,1 * alligator clip adapter,1 * toolkit,1 * user manual,2 * 9V battery