How To Use
Step 1: Switch MOISIT/pH/LIGHT position.
Step 2: Stick the probe into the soil about 2-4 inches.
Step 3:Adjust the position of the probe until the pointer on the dial swing slightly.
Step 4: After 10 minutes, note moisture/pH/light level in the dial.
Step 5:Remove probe from soil and wipe clean after each use.
Moist readings range: 0 DRY-10 WET
Light readings range: 0 DARK-2000 LUMEN
PH readings range: 8 ALKALIN-3.5A CIDIC
Multifunctional: test Moisture / Light / pH
1 x Soil Moisture/PH Meter
1. Without touching the stone, don't too hard, easy to damage the probe.
2. After using, need to clean and wipe the probe (can't test the water)
3. Don't inserted in the soil for a long time for using.
4. Design for testing soil, don't use it to test pure water or too rigid ground.
Multifunctions: This instrument can test soil moisture, PH value, sun light at root level. You will never plant your lovely flowers into high-acid or extreme alkalinity soil. Help you to determine if plant getting adequate light. Let you know when to water.
Scientically Accurate: Easy to read moisture, PH and light levels. Promotes healthy plants. With high accuracy and easy operation, you can take good care of your plants.
Testing Range: 1-10 (Dry, Moist, Wet), with color coded reading system, from red, green to blue. Use the Moisture Meter to easily check on the condition of your plants.
No Batteries Required: No batteries or electricity needed. Simple and convenient to use. Simply insert the meter into the soil, switch to the setting you want to measure and read the scale.
Indoor/Outdoor Use: Compact and portable design for indoor/outdoor use. This item is a perfect tool to test the soil conditions ( Moisture/Light/PH) of fruits, flowers, vegetables, shrubs, etc.